Cigar Facts

Hand-Made Cigars – Long filler tobacco runs the length of the cigar. The wrapper, binder and filler are rolled together completely by hand.

Machine-Made Cigars – High-speed machinery combines short-filler and scrap tobacco with wrapper and binder. Tension placed on the machine requires the wrapper and binder to be made of “homogenized” tobacco product, which is stronger than natural leaves.

Hand-Rolled Cigars – A few brands combine machine-bunching, using long filler, with a hand-rolled wrapper. Some larger cigars use a mix or combination of short and long-filler tobacco.

Aging – Aging is necessary to prepare the leaf and allows the leaf to “mellow” or become more flavorful, less “green”.

Humidity – Humidity is generally best at 70%. Too much humidity will not draw well and smokes unevenly. Too little humidity creates an environment that is too dry, so the cigar will disintegrate and lose flavor.

Temperature – The storing temperature should be around 70° because beetles can’t hatch below 75° and mold can develop in hotter temperatures.

Cigar Wrapper – The wrapper is the most expensive single component and contributes up to 70% of the flavor. It should be wrapped tightly over the body of the cigar creating uniform color, oily luster and no large veins. The wrapper should not be dry, flake or crumble when touched.

Wrapper Types

  • Connecticut Shade – Grown on 1,200 acres along the Connecticut River, Connecticut Shade is famous for smooth complexion, light brown shade and delicate, yet complex flavor. Growing fields are covered with translucent tents to diffuse light.
  • Cameroon – Is darker in color and heavier in taste. It’s generally from the rich soils of West Africa, but other regions include Mexico, Honduras and Indonesia.
  • Maduro – Maduro is from the Spanish word “ripe”. It is from the top of the tobacco plant, last to be picked, thicker and richer. Bulk piles cause tobacco to “sweat,” causing it to become darker and sweeter.
  • Claro – The green wrapper with a “bitter taste” is caused by quick heating.

Binder – The binder binds the cigar together and is picked from the upper leaves of a tobacco plant for strength, flavor and burning characteristics. Since it is unseen, it is selected for function, not beauty.

Filler – The filler represents the majority of the volume yet contributes the least amount of flavor. It’s determined by type of seed, chemical makeup of the soil and where on the tobacco plant the leaf was grown. All premium cigars use “long-filler”, meaning the leaves are left whole and intact. Domestic (machine-made) cigars use “short-filler” which is chopped from broken leaves and tobacco scraps. The ash of a long-filler cigar burns in a long, cylindrical pattern, while the ash from a short-filler cigar drops off like a cigarette ash.

Cap – The cap is applied over the closed end of the cigar and holds the tail end of the wrapper leaf closed.

Maduro Wrapper – Maduro is the Spanish word for “ripe.” Leaves are selected from the fourth and fifth priming of the tobacco plant. Maduro wrappers are fermented longer and at a higher temperature. Not all tobacco leaves can be used to create maduro wrappers. Maduro tobacco must withstand higher temperature during fermentation. Connecticut Broadleaf and Mexican Sumatra are the two strains most commonly used to create a maduro wrapper.

Making a Cigar – First, a master blender creates a cigar blend. Then, depending on the ring gauge, a cigar will contain a blend of 2 to 4 different tobaccos. The roller takes the leaves and presses them together in his or her hand, then places the leaves on a binder. This is called a “bunch.” Next, the roller cuts the tobacco to the appropriate length and places into a mold. The tobacco is then screw pressed for about 1-hour in the mold until the roller removes the cigar from the mold and wraps the cigar with the wrapper leaf.

Aging the Cigar – The next stop for cigars is the aging room. Most cigars are aged at least 21-days, but you can leave the cigars in an aging room for 90 to 180 days. Aging the cigar tobacco allows the flavors to “marry” and create a more balanced smoke. After aging the cigars, each box is filled with individually hand-selected cigars matched for color.

Sizes

Cigar Sizes – The longer the length and the fatter the diameter, the cooler the cigar will smoke.

Ring Sizes – One ring is equal to 1/64th of an inch. The larger ring sizes have more filler tobacco. The larger the ring means the longer and cooler the smoke. Smaller ring sizes are easier to handle and faster to smoke.

Cigar Lengths – Longer lengths give cooler smokes. Increased lengths = increased smoking times. Shorter lengths smoke hotter = less smoke travel time.

Standard Sizes

Double Corona

  • 6 3/4 x 48+
  • Good for after dinner
  • About 1-hour to smoke

Churchill

  • 6 ¼ x 45
  • Next largest in the size category

Corona

  • 5 ½ x 46
  • About 45 minutes to smoke

Lonsdale

  • 6 ½ x 42
  • A longer corona

Robusto

  • 5 ¼ x 50
  • Also called a Rothschild
  • Very popular short smoke, about 30 minutes

Panatela

  • 7 x 34
  • A long, thin cigar

Figurado

  • Means “shaped”
  • Torpedo, Pyramid, and Belicoso

Regions

Dominican Republic – Most Dominican tobacco is derived from Cuban seed.

Honduras – Full bodied tobacco grown from Cuban and Connecticut seed.

Connecticut Shade Golden Color – the finest in the world, grown entirely in shade.

Connecticut Broadleaf Sun Grown– darker and sweeter.

Cameroon – High-Quality wrapper- greenish-brown in color.

Ecuador LaGloria – Sun-grown, silky texture.

Cutting

Guillotine – Single & Double.  Most popular method. Cut where the domed head starts to curve toward the sides. Easiest to draw, but be careful of cutting too much.

V-Cut – Easiest to do and protect the cap. The small hole affects the draw.

Piercing – Insert a small object (needle, paper clip) into the head. It protects the cap, but can be a tough draw and may give a bitter taste.

Scissors – Two blades used, can result in a poor cut.

Bulls Eye or Punch – Small, round and compact. Gaining popularity.

Biting – Messy and barbaric but always available.

Lighting

Hold the cigar with the foot at a 45° angle to the flame, rotate to ensure even burn all the way around, also known as pre-char, roasting or toasting. Once evenly charred, place the cigar in your mouth. Gently draw air through the head of the cigar, still holding the flame source an inch below the pre-charred foot. Look at the foot to make sure all is burning well. Use a clean flame source such as a butane lighter, proper cigar match or a cedar taper. The ash is a testament to the quality of the cigar, a cylinder form that can be up to several inches in length. Never stub out a cigar; it will extinguish itself. Although you can re-light a cigar, it is never as good the second time around.

Share this post

Share on facebook
Share on google
Share on twitter
Share on linkedin
Share on pinterest
Share on print
Share on email